Acuvim-L Series : L-WEB User manual
www.accuenergy.com
V: 1.0 Revised: Sept. 2019
10
• The first page of the NET Settings will be the 'N1' setting page. This is the meters DHCP
setting screen, and by default this is configured as Manual. Setting this configuration to
Auto will allow the router to assign the meter with an IP address, whiles Manual will allow
the user to configure the IP address.
• Press the 'V/A' button to enter edit mode.
• Press 'P' or 'E' to change the setting and press 'V/A' to confirm.
NOTE: If the DHCP is selected as Auto, the Ethernet module needs to be rebooted before it
can be assigned with the new IP address.