Accudata GVM-3 Manual Download Page 9

Page: 9 / 88

Accudata GVM-3 Ground Vibration Meter

Page Nº 6

WARNINGS

Battery

: This Accudata GVM-3 uses Lithium-Ion Batteries. Do not use in environments not

listed in the equipment specifications and / or in corrosive environments. Do not place the Accudata

GVM-3 near heat sources, high temperature environments, direct sunlight, ovens or pressurized

containers. Do not expose to temperatures over 60 ºC (140 ºF) otherwise, the battery could be damaged

and cause acid to leak, warming and possible fire or explosion. Do not drill or open the battery. If the

battery has leaked acid and contact is made with it, wash immediately with water and seek medical

advice.

Charging temperature: 0º C to +45 ºC

Working temperature: -10 ºC to +55 ºC

Storage temperature (short term): -20 ºC to +60 ºC

Storage temperature (long term): -20 ºC to +25 ºC

The battery must be recycled or disposed of properly. Only use the power supply provided with

the equipment.

WEEE Directive

This symbol means that the Accudata GVM-3 is not domestic waste.

According to directive 2012/19/EU for waste of electric and electronic equipment

(WEEE), the equipment cannot be disposed of as normal waste. Return the GVM-3 to

the seller or deposit it in an authorised recycling point.

Summary of Contents for GVM-3

























































































Search results

Summary of Contents for GVM-3

Reviews:

Related manuals for GVM-3

Brands by name

Popular brands

Accudata GVM-3, Manual

Search results

Summary of Contents for GVM-3

Reviews:

Related manuals for GVM-3

Brands by name

Popular brands