Accudata GVM-3 Ground Vibration Meter
Page Nº 11
The transducers and power connectors are on the left hand side, as shown below:
The numbers show:
1.
Power plug
: Used for,
◦
12 V Power supply.
◦
External trigger. (An external device is needed, please contact your distributor if
required).
◦
Power supply for external devices, e.g. a router. (A special plug is required).
2.
Channels 1-3: Connection for Tri-axial Block 1 or channels 1, 2 and 3.
3.
Channels 4-6: Connection for Tri-axial Block 2 or channels 4, 5 and 6 (Only on 7
channel equipment)
4.
Channel 4 (4 channel version) or Channel 7 (7 channel version): This channel is used in
the standard version for the low frequency air over-pressure microphone.
The LAN (RJ-45 connector) and Serial Port (DB9 Connector) are on the right hand side, as
shown below:
1
2
3
4
1
Summary of Contents for GVM-3
