Table Of Contents
1. Features
2. Safety
3. Start Up Procedures
A. Uncrate Machine
B. Connect Power & Air
C. Load Dowels into Machine
D. Set up Pressure Pot
1. Conventional Doweling
2. Pre-glued Doweling
E. Inserting Dowel
4. Operating Procedures
A. Daily Operation of Machine
5. Maintenance & Storage
A. The Air System
B. The Glue / Water System
C. Dowel Feed System
6. Troubleshooting
1. If dowels do not come out of gun when cycled
2. If dowels come back into the singulator after being pushed into the supply hose
3. If there is excessive glue on nozzle and plunger
4. If the gun does not cycle, or cycles erratically when trigger is pushed
5. If the dowels do not feed properly or get jammed as they come out of the bowl
7. Replacement Parts
A. Machine Overview
B. Pneumatic Diagram
C. Electric Diagram
D. Gun
E. Dowel Feed Bowl
F. Singulator Unit
G. Pressure Pot
H. Bowl Driver
8. Requesting Assistance or Service
9. Warranty
10. Franklin Glue Information
A. MSDS
11. Contact Information
12. Warranty
