AT2T-3238-1 Rev. C
ACCU-STEAM
GAS GRIDDLE OWNERS MANUAL
Page
12/29
OPERATION (cont.)
won’t change or vary by the location on the griddle surface. There are no hot or cold
zones.
Heat Lamp
It is normal for the heat light to cycle on and off.
This light indicates when the
main burners are energized. You will soon notice how little they are energized to
maintain perfect surface temperatures on your griddle.
Grease Pan
Use caution when emptying the grease pan. The contents in this pan could cause
severe burns. The pan should be checked periodically and emptied as necessary to
prevent an overflow or dangerous condition.
DAILY CLEANING
Cleaning during the work shift can be performed with a sharp scraper. When heavy
cleaning at the end of a shift or periodically as needed, the following is recommended:
Turn the griddle off and allow it to cool to between 220°F and 240°F
(104°F and 116°C).
Use water, ice and/or griddle cleaner as needed. For
example, the 3M Scotch-Brite
Quick Clean Griddle System or Ecolab Grease
Express
High-Temp Grill Cleaner System are commercially-available
products for cleaning griddles. Clean-up is very easy using these products
with the quick clean liquid, water, ice or combinations of these liquids.
If a griddle with grease on the cooking surface is cleaned at a high
temperature using water or ice, the grease may splatter and cause
skin burns. Be very cautious!
Do not use a griddle stone or brick to clean the griddle.
Do not use a water-jet to clean the griddle.
Dry all surfaces.
NOTE
Never leave a chlorine sanitizer in contact with the stainless steel longer
than 10 minutes. Longer contact can cause corrosion and permanently
damage the griddle.
CAUTION
The grease can contents could cause severe burns. Slowly remove the
grease can from the griddle to avoid spilling the contents.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
