Accu-Sort AXIOM 400, Product Manual

Page: 75 / 132

AXIOM™ 400 Product Manual
Maintenance
6-3
06-AXIOM400-Maintenance_R10.doc Accu-Sort Systems, inc.
Cleaning the Exit Window
WARNING:
Shut down the Axiom before performing this maintenance task.
Do not stare into the Axiom’s exit window at the laser light. Avoid direct eye
exposure. The laser light level does not constitute a health hazard, however
staring at the laser light for prolonged periods could result in eye damage.
CAUTION:
Never apply cleaning solution directly to the exit window. Always
apply the solution to a cloth, and then the cloth to the window. Do not use
any chemical on the Axiom that is unsafe for plastics, such as benzene,
acetone, or similar products.
The exit window cleaning procedure may be performed without removing the
reader from the mounting structure if it is possible to do so.
1.
Turn off the Axiom.
2. Follow the exterior cleaning procedure before cleaning the exit window
3. Check the exit window surface for any dust, dirt, or smudges. If the
window needs to be cleaned, proceed to Step 4.
4. Make a solution of seven parts denatured alcohol and three parts water.
5. Apply the cleaning solution to a cotton swab or lint-free cloth.
6. Apply the cleaning solution to the exit window.
7. Remove any streaks or remaining moisture from the exit window with a
dry, soft, lint-free cloth or lens paper.
8. Verify Axiom reader operation. Follow the Operations Checklist procedure
in Chapter 5.