3019 FLUORESCENCE MICROSCOPE SYSTEM
ACCU-SCOPE
®
73 Mall Drive,
Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
10
DETAILED ASSEMBLY
(continued)
Eyepieces (Fig. 9)
Remove the eyepiece cap
①
and insert the eyepiece
②
into
the eyepiece tube.
Mercury Lamp Power Supply (Fig. 10)
Make sure the main switch to the microscope and mercury
power supply are in the off (O) position.
Connect one side of the plug
①
to the port on the mercury
lamp house and tighten the lock screw
②
.
Connect the other side of the plug
①
to the port on the
mercury lamp power supply
③
.
Connect the one side of the power cord
④
to the socket
⑤
on the mercury power supply and the other to an electrical
outlet that is well grounded.
The Fuse (Fig. 11)
Make sure the main switch to the microscope and mercury
power supply are in the off (O) position.
Remove the plug
②.
Fasten the flute
①
of the fuse set
②
by fingers, take out the
fuse set
②
from holder. Remove the fuse
④
from the flute
③
and change a new one. Re-insert the flute back into the
main power supply.
Fig. 9
Fig. 6
Fig. 10
Fig. 11
