6.
Getting Started Guide - Accu-Chek
®
Performa
3. Perform a Blood Glucose Test
1-3.
• Wash and dry your hands.
• Prepare the lancing device.
• Take one test strip from the test strip
container. Close the container tightly.
Gently squeeze your finger to assist the flow
of blood. This helps you get a blood drop.
Touch the blood drop to the front edge of
the yellow window of the test strip. Do not
put blood on top of the test strip.
After your result appears, discard the used
test strip.
Insert the test strip into the meter in the
direction of the arrows. The meter turns on.
Make sure the code number on the display
matches the code number on the test strip
container. If you miss seeing the code
number, remove the test strip out and
reinsert it into the meter.
When the blood drop symbol flashes, obtain
a blood drop from your fingertip.
To test using blood from alternative sites,
refer to your Owner’s Booklet.
When you see
flash, you
have enough blood in the
test strip.
4.
5.
7.
8.
10.
9.
Yellow
Release Button
note: your new meter comes with the batteries installed and a preset time and date. you may need to change the time to your time zone.
Having the correct time and date is important if you use the meter memory or if you want to download your results to a computer.
Getting Started Guide - Accu-Chek
®
Performa nano
ChAnGE ThE CoDE ChIP EvEry TIME
yoU oPEn A nEW Box oF TEST STrIPS.
Make sure the meter is off. Turn over the
meter. Turn over the code chip so that the
code number faces away from you, then
push it into the code chip slot until it stops.
1. Insert the Code Chip
1.
Press and release
to
turn on the meter. The
time, date, and “set-up”
appear on the display with
the hour flashing.
Repeat steps 2 and 3 to set the minutes, am/pm, day, month,
and year. The flashing field is the one you are changing.
Press and release
or
to decrease or
increase the hour. Press and hold
or
to scroll faster.
Press and release
to confirm the hour.
The minutes flash.
Once you set the year, press and release
. The flashing test strip symbol appears.
2. Adjust the Time and Date – First Time Use
1.
2.
4.
3.
5.
decrease
increase
16
17
