Accu-Chek GO Instructions For Use Manual Download

Page: 30 / 208

Entering settings

Farbe: P 021 – Prüfmittelnummer: 201

Press the

button

to scroll from one setting to the next without changing anything

(this also saves the unchanged setting),

to save settings you have changed,

to turn the meter off when

End

is displayed,

to leave the set-up at any time and turn the meter off. To do this,

press and hold down the button for at least 3 seconds - all
changes you have made up to then will be saved.

Note

If you are in one of the set-ups and 60 seconds elapses after you

last pressed a button, the meter turns off automatically. All
changes you saved up to then by pressing

will be retained.

Summary of Contents for GO

















































































































































































































Search results

Summary of Contents for GO

Reviews:

Related manuals for GO

Brands by name

Popular brands

Accu-Chek GO, Instructions For Use Manual

Search results

Summary of Contents for GO

Reviews:

Related manuals for GO

Brands by name

Popular brands