94
Farbe: P 249 – Prüfmittelnummer: 126 X
Using your meter as an electronic notebook
95
Using your meter as an electronic notebook
5
Start the program on your PC or handheld computer, or on the
Accu-Chek Smart Printer System, so it is ready to receive the data.
Position the meter 10-20 cm away from the infrared window of the
infrared cable, handheld computer or the Accu-Chek Smart Printer
System. Point the two infrared windows towards one another.
With the meter turned off, press the S and M buttons at the same
time.
The meter turns on without advancing a test strip. Two arrows
appear in the display.
Start downloading at the PC, handheld computer or the Accu-Chek
Smart Printer System.
The meter automatically sends all your blood glucose test results. The
two arrows flash in the display.
Once downloading has finished, the arrows stop flashing and the meter
turns itself off.
i
If data transfer did not occur or was incomplete, the two arrows
do not start flashing and, after 5 minutes, the meter turns itself
off. If this happens, please refer to Chapter 10 “Symbols, display
messages and troubleshooting”.
