background image

126

Acoustic Mode

Farbe: P 249 – Prüfmittelnummer: 203

127

Acoustic Mode

6

Note

i

  Information or warnings in the form of symbols (e.g. drum symbol 

or 

 symbol, see Chapter 12.1) that are displayed together 

with the result are not announced acoustically. 

6.4  Announcement of results and average values from memory

Only the last (most recent) result that was saved can be announced 
acoustically. 

If you press the M button to turn the meter on, you first hear the long 
power-on beep followed by the beep sequence 1 – 2 – 3 and then the 
most recent result.

Only the average for the last 7 days is announced acoustically. The low-
est and highest results within this period are not announced acousti-
cally.

The announcement follows the same pattern as any result that is 
announced directly following a test.

Notes

i

  If the 7-day average cannot be calculated, three horizontal bars 

 are displayed. This is signalled acoustically with 3 long 

beeps representing 3 zeroes (

 — — — 

).

i

  If the result that was most recently saved is flagged by the bottle 

symbol   as being a performance check result (see Chapter 7), it 
is announced in the same way as any blood glucose test result. 
There is no acoustic signal to identify it as a performance check 
result. Likewise, there is no acoustic signal to identify a result 
flagged by an asterisk as being a special result (see Chapter 4.7). 

i

  The 14 and 30-day averages and the lowest and highest results 

within these two periods (see Chapter 5.3) are not announced 
acoustically in Acoustic Mode, but only displayed.

i

  If no result has been saved, just three horizontal bars 

 are 

displayed. There is no acoustic announcement.

Summary of Contents for Accu-Chel
















































































































Reviews: