manualshive.com logo in svg

Accu-Chek Accu-Chel, User Manual

Share
Download
Accu-Chek Accu-Chel User Manual Download Page 49

96

Testing blood glucose

Farbe: P 249 – Prüfmittelnummer: 203

97

Testing blood glucose

4

 

Instead of a result: 

 

The result is above 33.3 mmol/L

 

Instead of a result: 

 

The result is below 0.6 mmol/L

4.7  Flagging special results

You can flag special results, e.g. results obtained from alternate site 
testing or after exercise, with an asterisk  .

You can only do this while the result is displayed and as long as you 
have not yet turned the meter off. 

 

No other symbol 

Asterisk

While the result is displayed: 

P

  Press the S button. The asterisk appears in the display. 

If you press the S button again, the asterisk disappears again.

The result is saved together with the asterisk as long as the asterisk is 
displayed and you press the Test button to turn the meter off.

4.8  Evaluating results

 If the displayed test result agrees with the way you feel, follow 

your doctor’s advice. If the displayed test result does not agree 
with the way you feel, please perform a performance check with 
an Accu-Chek Compact Autocontrol control solution and a new 
test strip (see Chapter 7). Then perform another blood glucose 
test. If the new test result still does not agree with the way you 
feel, please contact your doctor.

 Do not change your treatment based on just one result. 

Summary of Contents for Accu-Chel
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands