11 Mbps Wireless USB Adapter
10
Disabled). To completely configure WEP, you must use the Configuration Utility.
(see “Encryption” on page 25).
7.
Set the “ESSID” identifier to the same as that used by the ad hoc workgroup or
access point to which you want to connect (the WN3501C Access Point default
is WLAN). If you will be roaming among multiple access points with different
BSS IDs, a value of “ANY” will allow connection to any SSID.
8.
Set the “Fragmentation Threshold,” (The default 2,346 means “Disabled”) see
“Terminology” on page 38 for a description of “Fragmentation Threshold.”