System Configuration
5-58
Note:
The index and length values used in the
key
command must be
the same values used in the
encryption
and
transmit-key
commands.
CLI Commands for WEP over 802.1x Security – From the
802.11a or 802.11g interface configuration mode, use the
authentication
command to select open system authentication.
Use the
multicast-cipher
command to select WEP cipher type.
Then set 802.1x to required with
802.1x
command, and disable
MAC authentication with the
mac-authentication
command. To
view the current 802.11g security settings, use the
show
interface wireless g
command (not shown in example).
----------------Security----------------------------------
Closed System : DISABLED
Multicast cipher : WEP
Unicast cipher
: TKIP
WPA clients : SUPPORTED
WPA Key Mgmt Mode
: PRE SHARED KEY
WPA PSK Key Type
: HEX
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 1
Static Keys :
Key 1: ***** Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : SHARED
==========================================================
AP#
AP(config)#interface wireless g
6-70
Enter Wireless configuration commands, one per line.
AP(if-wireless g)#authentication open
6-94
AP(if-wireless g)#encryption 128
6-95
AP(if-wireless g)#multicast-cipher wep
6-101
AP(if-wireless g)#end
AP(config)#802.1x required
6-52
AP(config)#no mac-authentication
6-58
AP(config)#
Summary of Contents for WA6102X
Page 27: ...Hardware Installation 2 4 ...
