System Configuration
5-50
CLI Commands for the 802.11
g
Wireless Interface – From the
global configuration mode, enter the
interface wireless g
command to access the 802.11g radio interface. Set the interface
SSID using the
ssid
command and, if required, configure a name
for the interface using the
description
command. You can also
use the
closed-system
command to stop sending the SSID in
beacon messages. Select a radio channel or set selection to Auto
using the
channel
command. Set any other parameters as
required. To view the current 802.11g radio settings, use the
show interface wireless g
command.
AP(config)#interface wireless g
6-70
Enter Wireless configuration commands, one per line.
AP(if-wireless g)#description RD-AP
6-85
AP(if-wireless g)#ssid r&d
6-90
AP(if-wireless g)#channel auto
6-88
AP(if-wireless a)#closed-system
6-86
AP(if-wireless a)#transmit-power full
6-99
AP(if-wireless g)#speed 6
6-87
AP(if-wireless g)#max-association 32
6-100
AP(if-wireless g)#beacon-interval 150
6-90
AP(if-wireless g)#dtim-period 5
6-91
AP(if-wireless g)#fragmentation-length 512
6-92
AP(if-wireless g)#rts-threshold 256
6-93
AP(if-wireless g)#exit
Summary of Contents for WA6102X
Page 27: ...Hardware Installation 2 4 ...
