Accton Technology ES4626, Management Manual

Page: 36 / 523

36
2.1.15 set default
Command: set default
Function:
Reset the switch to factory settings.
Command mode:
Admin Mode
Usage Guide:
Reset the switch to factory settings. That is to say, all configurations made
by the user to the switch will disappear. When the switch is restarted, the prompt will be
the same as when the switch was powered on for the first time.
Note:
After the command, “
write
” command must be executed to save the operation. The
switch will reset to factory settings after restart.
Example:
Switch#set default
Are you sure? [Y/N] = y
Switch#write
Switch#reload
2.1.16 setup
Command: setup
Function:
Enter the Setup Mode of the switch.
Command mode:
Admin Mode
Usage Guide:
ES4626/ES4650 provides a Setup Mode, in which the user can configure
IP addresses, etc.
2.1.17 language
Command:
language {chinese|english}
Function:
Set the language for displaying the help information.
Parameter: chinese
for Chinese display;
english
for English display.
Command mode:
Admin Mode
Default:
The default setting is English display.
Usage Guide:
ES4626/ES4650 provides help information in two languages, the user can
select the language according to their preference. After the system restart, the help
information display will revert to English.
2.1.18 write