Accton Technology ES4626, Management Manual

Page: 156 / 523

156
5.3.2 GVRP Commands
5.3.2.1 garp timer join
Command: garp timer join <timer-value>
no garp timer join
Function:
Set the
join
timer for GARP; the “
no garp timer join
” command restores the
default timer setting.
Parameter: < timer-value>
is the value for
join
timer, the valid range is 100 to 327650
ms.
Command mode:
Interface Mode
Default:
The default value for
join
timer is 200 ms.
Usage Guide:
GARP application entity sends a
join
message after
join
time timeout,
other GARP application entities will register this message sent by this GARP application
entity on receiving the
join
message.
Example:
Set the GARP
join
timer value of port 1/10 to 1000 ms.
Switch(Config-Ethernet1/10)#garp timer join 1000
5.3.2.2 garp timer leave
Command: garp timer leave <timer-value>
no garp timer leave
Function:
Set the
leave
timer for GARP; the “
no garp timer leave
” command restores
the default timer setting.
Parameter: < timer-value>
is the value for
leave
timer, the valid range is 100 to 327650
ms.
Command mode:
Interface Mode
Default:
The default value for
leave
timer is 600 ms.
Usage Guide:
When GARP application entity wants to cancel a certain property
information, it sends a
leave
message. GARP application entities receiving this message
will start the
leave
timer, if no
join
message is received before
leave
timer timeout, the
property information will be canceled. Besides, the value of
leave
timer must be larger
than twice of
join
timer, otherwise a error message will be displayed.
Example:
Set the GARP
leave
timer value of port 1/10 to 3000 ms.
Switch(Config-Ethernet1/10)#garp timer leave 3000