Accton Technology CheetahSwitch Workgroup-3514F, Management Manual

Page: 66 / 114

Web-Based Management
3-6
Main Menu
Using the on-board Web agent, you can define system parameters, manage and
control the switch, the connected stack and all its ports, or monitor network conditions.
The following table briefly describes the selections available from this program.
Menu Description
System Provides basic system description, including contact
information.
Switch Shows hardware/firmware version numbers, power
status, and expansion modules in use.
IP Includes boot state, IP address, and the maximum
number of Telnet sessions allowed.
SNMP Configures communities and trap managers; and
activates traps.
Security Sets password for system access.
Upgrade Downloads new version of firmware to update your
system.
Address Table Provides full listing of unicast addresses, sorted by
address or VLAN.
STA Enables Spanning Tree Algorithm; also sets parameters
for switch priority, hello time, maximum message age,
and forward delay; as well as port priority and path cost.
Bridge Extension Displays/configures extended bridge capabilities
provided by this switch, including support for traffic
classes and VLAN extensions.
Priority Configures default port priorities and displays queue
assignments.
VLAN Configures VLAN group members and other
port-specific VLAN settings.
IGMP Configures IGMP multicast filtering.
Port Enables any port, sets communication mode to auto-negotiation, full duplex or
half duplex, and enables/disables flow control.
Mirror Sets the source and target ports for mirroring.
Trunk Specifies ports to group into aggregate trunks.
Statistics Displays statistics on network traffic passing through the selected port.