Accton Technology CheetahSwitch Workgroup-3514F, Management Manual

Page: 41 / 114

Configuring the Switch
2-31
The RJ-45 ports used for one side of a trunk must all be on the same internal switch
chip. The port groups permitted include:
The 100BASE-FX fiber ports used for one side of a trunk must all be on the same
module. However, the 1000BASE-SX ports used for one side of a trunk may be on
any switch in the stack, or both on the same switch if used standalone.
For example, when using Gigabit ports to form a trunk within a stack, the Gigabit
ports will all be at Port 25. In this case, you could specify a trunk group consisting of:
(Unit1-Port25, Unit2-Port25, Unit3-Port25, Unit4-Port25),
or two trunks consisting of:
(Unit1-Port25, Unit2-Port25) and (Unit3-Port25, Unit4-Port25).
Switch Model Group 1 Group 2 Group 3
ES3514F 1,2,7,8 3,4,9,10, 5,6,11,12
ES3526F 1,2,3,4, 13,14,15,16 5,6,7,8, 17,18,19,20 9,10,11,12, 21,22,23,24
ES3526G 1,2,3,4, 13,14,15,16 5,6,7,8, 17,18,19,20 9,10,11,12, 21,22,23,24
Media Module
100BASE-FX Any ports on a single module.
1000BASE-SX Up to four Gigabit ports from any switch in the stack, or both Gigabit ports on two
modules installed in a standalone switch.