![Accton Technology CheetahSwitch Workgroup-3514F Management Manual Download Page 36](http://html1.mh-extra.com/html/accton-technology/cheetahswitch-workgroup-3514f/cheetahswitch-workgroup-3514f_management-manual_3729736036.webp)
Using the System Configuration Program
2-26
Displaying the Current Bridge STA
The parameters shown in the following figure and table describe the current Bridge
STA Information.
Spanning Tree Information : Bridge STA Information
==================================================
Priority
: 32768
Hello Time (in seconds)
: 2
Max Age (in seconds)
: 20
Forward Delay (in seconds): 5
Hold Time (in seconds)
: 1
Designated Root
: 128.0000E800E800
Root Cost
: 501
Root Port
: 1
Reconfig Counts
: 3
Topology Up Time
: 48069 (0 day, 1 hr, 2min, 34 sec)
<OK>
Use <Tab> or arrow keys to move, <Enter> to select.
Parameter
Description
Priority
Device priority is used in selecting the root device, root port, and designated
port. The device with the highest priority becomes the STA root device.
However, if all devices have the same priority, the device with the lowest
MAC address will then become the root device.
Hello Time
The time interval (in seconds) at which the root device transmits a
configuration message.
Max Age
The maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure.
Forward Delay
The maximum time (in seconds) the root device will wait before changing
states (i.e., listening to learning to forwarding).
Hold Time
The minimum interval between the transmission of consecutive
Configuration BPDUs.
Designated Root
The priority and MAC address of the device in the Spanning Tree that this
switch has accepted as the root device.
Root Cost
The path cost from the root port on this switch to the root device.
Root Port
The number of the port on this switch that is closest to the root. This switch
communicates with the root device through this port. If there is no root port,
then this switch has been accepted as the root device of the Spanning Tree
network.
Reconfig Count
The number of times the Spanning Tree has been reconfigured.
Topology Up Time
The time since the Spanning Tree was last reconfigured.
Summary of Contents for CheetahSwitch Workgroup-3514F
