13
6. Fit the assembled middle bracket to the
side panel. There are two sets of fixing
holes on each side panel, depending
which side of the bed the side panel is
fitted, as shown in Figure 9.4. Fit the
bracket to the set of holes closest to the
headboard using the M6 x 20 bolts and
M6 washers as shown in Figure 9.5.
Tighten the bolts using the 4mm Allen
key.
Figure 9.4
Figure 9.5
7. Mount the side panels onto the bed frame
as shown in Figure 9.6. Position the side
panel between the headboard and
footboard and fit the centre bracket claw
over the bed frame side bar.
Figure 9.6
8. Fit each side panel to the side panel end
brackets with the M6 x 20mm bolts and
M6 washers as shown in Figure 9.7.
Leave the bolts slightly loose.
Figure 9.7
9. Adjust the side panels so they are fitted
snugly against the headboard and
footboard. Tighten the bolts previously
left loose using the appropriate Allen key.
10. Carry out the functionality check in
Section 13.
Headboard
