54
© Accora Configura® assessment helpline: 01223 206110 | [email protected] | www.configura.uk.com
Physical properties:
Mean mass:
210 g/square metre
Coating adhesion:
35 N/50mm (minimum)
Water penetration
Resistance:
35Kpa (minimum)
Tear strength:
Weft
50N (minimum)
Warp
50N (minimum)
Breaking load:
Warp
650 N/50mm (minimum)
Weft
250 N/50mm (minimum)
Extension at break:
Warp
85% (minimum)
Weft
300% (minimum)
Warnings
n
Do not allow children or animals to play with or near the chair.
n
This chair is an electrical item and should be treated with caution.
n
The motion lock-out control must be engaged when the chair is not in use.
n
Take care when adjusting positions to avoid trapping or pinching of body parts.
n
Always ensure that there is nothing to obstruct the free movement of the chair.
n
Do not sit on footrest.
n
Only the occupant or a trainer carer should operate the chair.
n
Do not fall into the chair as this could severely damage the chair and the mechanism.
General Protection
n
Protect from the elements.
n
Use only on a level debris free surface.
n
Do not allow the mechanism to become waterlogged.
n
Do not use abrasive cleaners on the mechanism.
n
Do not use solvents or flammable fluids on the mechanism.
Electrical Limitations
n
Disconnect from the electrical supply before moving.
n
Disconnect from the electrical supply before undertaking any maintenance.
n
Use only genuine spare parts from the original manufacturer.
n
The mechanism is designed to be unusable in the event of a power failure unless fitted with a battery
backup or rechargeable system. The number of movements will depend on the system fitted together with
any loading conditions prevailing.
n
Do not increase the electrical fuse size in the plug top or attempt to connect any other mains connection to
the appliance.
n
Do not operate the controller for more than 2 minutes continuously in any 20 minute period.
n
Do not cover the transformer; Air cooling is required.
