![background image](http://html1.mh-extra.com/html/accora/configura/configura_instruction-manual_3699763040.webp)
40
© Accora Configura® assessment helpline: 01223 206110 | [email protected] | www.configura.uk.com
Replace split pins. (If you cannot replace the original split pins you
can use standard 'r-clips’.)
Replace the actuator plug into the control box.
Replacing the Actuator Brackets
These brackets are designed to break if the chair mechanism is subjected to unusual forces.
This can sometimes happen due to the chair being placed too close to a wall or an obstruction is in the way of
the chair lowering. If these brackets have broken, always check that the chair has sufficient space to rise and
recline and that there are no obstructions in the way.
Also make sure the user is transferring into the chair in the correct way: either when the chair is raised up at least
two thirds of the way or when it is completely lowered. The user should not transfer when the chair is only slightly
raised as this will cause the actuator brackets to break.
Remove actuator from lower fixing point as described above.
9
10
1
Actions on this page must be carried out by a trained technician