48
© Accora Configura® assessment helpline: 01223 206110 | [email protected] | www.configura.uk.com
Raise the chair by pressing the button for the lift movement.
This will extend the base outwards to allow access to the pins.
Disconnect power supply.
Remove the clip and pull out the pin from either side of the
mechanism allowing the bar to disconnect.
Reposition to the required angle: A=10°, B=20°, C=30°.
(It will be positioned at 30° as standard when supplied unless
otherwise requested.)
3
4
5
6
Actions on this page must be carried out by a trained technician
