WSD/HDe
Digital Audio Option Installation
3. Loosen and Rotate the PCI blanking plate retaining flanges on slots #1 and #3.
A. Loosen
slightly
and rotate the retaining flanges to the vertical position for the blanking plates in PCI board slots #1 and #3, as
shown below.
4. Inside the chassis, remove the Philips-head screw and the blanking plates in PCI slots #1 and #3.
A. Remove the Philips-head screw that secures the blanking plates, and then remove the blanking plates in PCI slots #1 and #3, as
shown below. Be sure to retain these two Philips-head screws, since you will need them later.
PCI Slot #1 and #3 with blanking plate removed.
Continued on next page…
Document Revised: 5-Nov-04 @ 8:09 AM
©
2004 / Accom, Incorporated
Page 3 of 15