20
release.
user manual.
3
Check tire pressure front and rear.
Inflate to correct pressure.
4
Check and adjust action of front and rear brakes.
Ensure there is no noise or
squeal.
5
Check smooth action and adjustment of front
suspension forks.
6
Check adjustment of bearings in head stock.
Adjust if necessary.
7
Check security of all handlebar stem fixings and
clamps.
Adjust to suit customer
preferences.
8
Check front and rear mudguards for security and
clearance from tires.
9
Check all cables are clipped securely and safely.
Check motor cable cannot rub
against the tire.
10
Check pedals have been fitted correctly and tightened
fully.
Note left and right hand
threads.
11
Check pedal cranks have been tightened fully on
bottom bracket axle.
Tighten to torque setting in
user and service manual.
12
Check smoothness and running clearance of bottom
bracket
13
Check seat post quick release clamp is properly in
place and secure and saddle is correctly fitted.
Adjust as necessary.
14
Check smooth operation of gear change on either
derailleur or hub gear and ensure all gears can be
selected.
Adjust as necessary.
15
Ensure side stand supports bike correctly and does
not interfere with other moving cycle parts.
16
Ensure motor wheel turns smoothly and quietly when
rotated by hand in forward and reverse direction.
Some additional resistance will
be felt when rotated in reverse.
17
Ensure correct chain tension.
18
Ensure chain guard is not rubbing on models
equipped with guard.
19
Ensure all reflectors are in place on pedals, wheels
