19
1. If there is bifurcation, breakage or rusting on the brake line or shift line, it must be
replaced;
2. When the thickness of the brake pads is less than 0.8-1mm, the film needs to be
replaced;
3. When the tread marks of the outer tire are worn to smooth or cracked or damaged,
they must be replaced. When the inner tire is damaged and cannot be inflated, the
tire must be replaced or replaced;
4. Inner tire must be replaced when air leakage occurs; the rim is deformed and needs
to be replaced in time;
5. When the tire spoke is damaged or rusted, it must be replaced
6. It can be replaced when the chain is deformed and the length is extended by 1%,
and can be measured with a tool. It should also be replaced when severely rusted.
7. The tip of the freewheel wheel or the tooth disc becomes sharp due to wear, and it
must be replaced when it makes a strange noise and is not well bitten.
Please read the above suggestions and precautions carefully and use them strictly in
accordance with this standard during the bike using.
6 Service
After sales service is available through your retailer.
7 Pre Delivery Inspection check list
The PDI is a critical part of the overall Quality Assurance process and must be completed by the
supplying dealer followed by a test ride and sign off before passing the bike to the customer.
The following items below are a generic list for all current Accolmile models and must be covered
during the PDI.
Item
Check off
by No.
Activity
Mechanical Parts
Notes
1
Check front and rear wheel for alignment and run
out.
Tighten spokes if necessary.
2
Check tightness of rear axle nuts and front quick Tighten to torque setting in
