Use a 7/32” drill bit to create the pilot hole.
Step 2-5 – Insert Wall Anchors
Carefully remove the glass whiteboard from the wall and place it in a safe spot.
7/32”
f
Insert a Self-Drilling Drywall Anchor (Part F) into each of the “x” marks
using a Phillips Head screwdriver. Turn clockwise until the head of each
anchor is flush with the wall.
Place a Standoff (Part G) over each drywall anchor. Insert a Phillips Head Screw (Part E)
through the standoff, into the anchor and tighten.
The screw should hold the standoff tightly against the wall.
Repeat this process for all standoffs.
Make sure all standoffs are flush against the wall before proceeding.
Step 6 – Install Standoffs
g
e
e
g
g
e
4x8=
8x
4x6=
6x
4x8=
8x
4x6=
6x
4x8=
8x
4x6=
6x
4x8=
8x
4x6=
6x
