Step 7-9 – Install Glass Board
c
d
d
g
Starting at an angle, press the Accessories Tray (Part B) up along the bottom of
the glass whiteboard.
Step 10 – Attach Accessory Tray
Place Washers (Part D) on the threaded section of each metal Standoff Cap (Part C).
Lift glass whiteboard and align holes with the Standoffs (Part G) on your wall.
Once all washers are in place: Insert Standoff Caps (Part C) through the
whiteboard and into the Barrels (Part G
).
Turn caps clockwise until they are almost tight against the glass dry erase board.
Repeat steps for all standoffs.
Fully tighten Standoff Caps once they are all in place.
Make sure the standoffs are flush against the board surface.
Push the tray up until the bottom of the back channel is fully against the glass.
The glass should fit between the gap in the back channel of the tray.
4x8=
8x
4x6=
6x
b
b
