2.Master Control
(1) AUTO mode:
(2) MANUAL mode:
AUTO mode and MANUAL mode are for Master Control. Relevant functions are as below:
Preset programs:1-10 programs and "AUTO" program (
program is the sequential running of these
1-10 programs.)
"AUTO"
Auto Speed: 1~100. Auto Fadetime: 0%~100%.
Warm white, cool white & neutral white/Speed:
.
0%~100%
1. The LEDs will turn red in Slave Control mode.
The LEDs will give responding sensitive when the parameters are adjusted in Master Control.
1. Slave Control
Warm white, cool white and neutral white effect is controlled by Channel 1.
In Slave control, Address setting (
) and Glide effect function can be set through a LED Setup
Tool(sold separately). In RGB mode, relevant controls are as below:
001~512
When the user confirms the settings of the LED products, the LEDs will flash momentarily to confirm that the
settings have been saved.
2. If the LED is not selected in "Setup with answer", it will turn red.
If the LED is not selected in "Setup no answer", it will switch off.
NOTE:
For Rebel-Bar-350 WW(warm white) version, CW(cool white) version and NW
(neutral white) version
NOTE:
1. The Glide Effect function can be switched on(YES) or off(NO). The transition from one level to another is
smoother when this function is switched on.
3. If the DMX signal is interrupted, the driver will keep the last received DMX signal(information) until the driver
is switched off or a new and valid DMX signal is sent.
2. When this function is switched off, the lighting intensity will changed from one level to another abruptly. (Thus,
when a quick lighting effect is required, the Guide Effect function should be switched off.)
-3-
24-004-2983-00
Rev1.1
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the
eye.
MOUNTING
See
below
illustrations
for
your
reference
NOTE:
Make sure the safe rope can hold at least 10 times weight of the device and with screw on it.
