Acclaim Lighting Quad Eye, User Manual

Page: 6 / 14

4
www.acclaimlighting.com
INSTALLATION
Quad Eye fixtures are designed to be mounted within surfaces that are no greater than 0.71”
(18mm) in thickness . A hole of diameter 4.88” (124mm) is required within the mounting
surface - the front bezel has a diameter of 5.31” (135mm) to conceal the mounting hole.
Two sprung arms provide downward pressue on the reverse side of the mounting surface to
keep the fixture securely in place. These arms must be fully retracted as the fixture is placed
into the mounting hole.
Quad Eye fixtures are Non-IC (Insulation Contact) rated and so must have a minimum
airspace of 1” (25mm) around and above its outer dimensions (see page 9).
Due to the shape of the Quad Eye main body, it can swivel further in one direction than the
other:
40
O
17
O
However, the main body can rotate almost a full 360
O
within the mount to allow full
coverage in all directions.