![background image](http://html1.mh-extra.com/html/acclaim-lighting/pixel-driver-400/pixel-driver-400_user-manual_3688338009.webp)
7
www.acclaimlighting.com
Note: A maximum cable size of 12 AWG
(4mm
2
) can be used directly within the
terminal block contacts.
OUTPUT PORT CONNECTIONS
There are eight output ports on the rear
panel, each of which uses a 4-pin terminal
block (5.08mm pitch). Three of the four
contacts are used at each port to provide
the attached Flex Tube Pixel strip with
+24VDC and ground together with an SPI
control signal.
1
2
3
Eth
ern
et
Th
ru
Po
we
r 2
00
W
Ma
x
Ground
SPI control signal
No connection
+24VDC
Power 200W Max
Power 200W Max
1
2
3
4
5
6
7
8
OUTPUT PORT POWER LIMITS
The output ports are fed with power in two groups: ports 1 to 4 and ports 5 to 8.
In each group of four output ports, ensure the total power draw does not exceed 200W
(8.3A). Flex Tube Pixel strips have the following power requirements:
•
Flex Tube Pixel
60W per 16.4’ (5m) length
•
Flex Tube Pixel SE
82.5W per 16.4’ (5m) length