Acclaim Lighting Dyna Drum SO, User Manual

Page: 8 / 22

6
Using an optional tenon mount
Optional tenon mounts are available for use when a Dyna Drum SO needs to be mounted
on top of a vertical pole. Tenon mounts are available for use with 2” and 4” poles of sufficient
rigidity for the weight of the fixture.
IMPORTANT: Tenon mounts are
suitable only for vertical pole
mounts where the fixture sits on
top of the pole. Tenon mounts
must NEVER be used to hang a
Dyna Drum SO below a pole. For
pendant-type installations, please
enquire about the Dyna Drum SO
pendant model.
To use a tenon mount
1 Slide the tenon mount onto the
vertical pole and secure using the
two bolts on the side (6mm hex key
required).
2 Fix the Dyna Drum SO to the tenon
mount using the supplied main
bolt (17mm A/F wrench required)
and pan control bolt (6mm hex key
required) as shown right.
3 Where required, feed the mains
and control cables into the access
holes and down the pole to a
suitable exit point.
4 Use a suitable silicone sealant to
cap off the cable access holes to
prevent water ingress.
Main
bolt
Pan
control
bolt
Pole
bolts