Acclaim Lighting Canvas, User Manual

Page: 5 / 32

3
www.acclaimlighting.com
INSTALLATION
CONNECTIONS
The Canvas controller uses two 10-way (Phoenix Contact® FK-MC) push-lock terminal blocks
to provide quick linking to the various input and output lines. Both terminal blocks can be
populated without the need to remove them from the controller, but detach easily when
necessary.
Ground
Contact
1
Contact
2
Contact
3
Contact
4
Ground
Contact
5
Contact
6
Contact
7
Contact
8
DM
X -
DM
X +
DM
X G
DM
X -
DM
X +
DM
X G
0-10V
+
0-10V
-
0-10V
+
0-10V
-
(2)
(2)
(2)
(1)
(1)
(1)
(2)
(2)
(1)
(1)
DMX
2
DMX
1
0-10V
2
0-10V
1
– – – – + + + +
G G
G 1 2 3 4 G 5 6 7 8
Contacts Contacts Gnd Gnd
G 1 2 3 4
CONTROL OUTPUTS
Both DMX universes and both 0-10V analog output
connections are made on a single 10-way terminal
block. The behavior of the 0-10V outputs can be
determined within the Settings section, see page 23.
The Aria wireless transmission of the first DMX
universe is determined within page 2 of the Settings
menu - see page 19.
CONTACT INPUTS
Eight dry-contact trigger inputs allow connection
to real-world sensors and can be configured to call
particular presets in response to both their closed
and re-opened states - see page 22.
Each input is maintained in a
normally open-contact state and
will register a closed-contact state
when linked to either of the two
ground terminals.
Note: No external voltages should
be introduced to the input lines.