Acclaim Lighting Canvas, User Manual

Page: 24 / 32

22
www.acclaimlighting.com
SETTINGS
1/8
NONE NONE
“OFF” Preset “ON” Preset
Contact 1
Done
PRESETS DIMMERS TIMERS SETTINGS
5/6
Assign
Assign
Voltage Out
(0 - 10 Volts)
Contact
Triggers
OFF
CONTACT TRIGGERS
The Canvas controller can accept up to eight dry contact trigger inputs (see page 3).
Using this section you can determine which presets should be shown in response to each
trigger input being closed and/or re-opened.
TO SET CONTACT TRIGGERS
1 Display page 5 of the settings
menu (see page 16).
2 Tap the OFF button to enable
the contact triggers feature.
Then tap the
Assign button to
display the setup page for the
first contact.
3 If necessary, tap the or
buttons to change to the
required contact page - each
page is aligned to the similarly
numbered physical contact
input.
4 You can set a preset for either
(or both) the on (contact
closed) and off (contact re-
open) events. Tap the required
NONE button (Note: if the
entry has previously been set,
it will show the name of the
associated preset)
.
5 The presets page will be
displayed. Tap the preset that
you’d like to associate with the
chosen contact event. Once
chosen, you will be returned
to the contact page.
6 Repeat steps 3 and 4 for each
required contact or tap the
Done button to save and exit.
All Off All On
PRESETS DIMMERS TIMERS SETTINGS
Preset 3 Preset 4
Preset 5 Preset 6
Create
Preset
Delete
Preset
Preset 7 Preset 8
Please select the preset you would like to use
1/10