Acclaim Lighting Aqua Graze, User Manual

Page: 13 / 24

11
www.acclaimlighting.com
DMX CHANNEL LAYOUTS
The number of DMX channels required to control the connected fixtures depends upon the
following settings, which are configured using the 6-way switch block:
•
Port grouping, and
•
Fixture type
AQUA DRIVER 150
The various DMX channel requirements for the various port grouping and fixture type
combinations on the Aqua Driver 150 are listed here:
DMX RGBW/A RGBW/A RGBW/A
address 4 Group 2 Group 1 Group
1
Port 1:
Red
Ports 1 & 2:
Red
All:
Red
2
Port 1:
Green
Ports 1 & 2:
Green
All:
Green
3
Port 1:
Blue
Ports 1 & 2:
Blue
All:
Blue
4
Port 1:
White
Ports 1 & 2:
White
All:
White
5
Port 2:
Red
Ports 3 & 4:
Red
6
Port 2:
Green
Ports 3 & 4:
Green
7
Port 2:
Blue
Ports 3 & 4:
Blue
8
Port 2:
White
Ports 3 & 4:
White
9
Port 3:
Red
10
Port 3:
Green
11
Port 3:
Blue
12
Port 3:
White
13
Port 4:
Red
14
Port 4:
Green
15
Port 4:
Blue
16
Port 4:
White
DMX White White White
address 4 Group 2 Group 1 Group
1
Port 1:
White
Ports 1 & 2:
White
All:
White
2
Port 2:
White
Ports 3 & 4:
White
3
Port 3:
White
4
Port 4:
White
See “Port grouping” on page 10 and “External DMX control mode” on page 14 for DMX
address configuration details.
4’ 1’
700mA 350mA
IMPORTANT: 1’ fixtures require a different drive
current setting to the longer 4’ fixtures - it is vitally
important to select the correct setting to avoid
damage to the fixtures. The drive current setting
affects all outputs equally, so it is not possible to mix
the two sizes on the same driver unit.
See “Fixture drive
current selection” on page 9.