9
www.acclaimlighting.com
CONNECTOR PIN OUTS
AQUA GRAZE RGBW/A
These connections are used for RGBW/A versions of the EO, SO and HO Aqua Graze fixtures:
AQUA GRAZE WHITE
These connections are used for White versions of the EO, SO and HO Aqua Graze fixtures:
+
R–
G–
B–
W–
Black
Red
Green
Yellow
White
1
2
3
4
5
6
7
8
+
Circuit 1–
Circuit 2–
Circuit 3–
Circuit 4–
Black
Red
Green
Yellow
White
1
2
3
4
5
6
7
8
FIXTURE DRIVE CURRENT SELECTION
Aqua Graze 1’ fixtures require a different drive current setting to the larger
4’ fixtures -
it is vitally important to select the correct setting to avoid
damage to the fixtures
. The drive current setting affects all outputs equally,
so it is not possible to mix the 1’ and 4’ fixture lengths on the same driver.
Note: Changes to the drive current must be made while the Aqua Driver unit is
powered down.
1’ FIXTURES
(350mA)
On the 2-way switch block, ensure both switches
are in the OFF position. Both of the adjacent
indicators will be OFF during operation.
4’ FIXTURES
(700mA)
On the 2-way switch block, ensure both switches
are in the ON position. Both of the adjacent
indicators will be ON during operation.
2
1
ON
2
1
ON
Summary of Contents for Aqua Graze
Page 1: ...User guide Aqua Graze...
Page 2: ......
Page 22: ...20 www acclaimlighting com DIMENSIONS AQUA DRIVER 400 Weight 4 4 lbs 1 99 kg...
Page 24: ...www acclaimlighting com...
