4
www.acclaimlighting.com
DMX IN
DMX
Tx
Rx
0-10V IN
DMX
CREATING A WIRELESS DMX INPUT
The optional Acclaim Lighting Aria units allow you create a wireless DMX link up to 2600
feet (792m) line of sight, between your control output and the Aqua Driver. Setup and
configuration is straightforward:
1 Connect the DMX output of one Aria unit to the DMX input (using either the terminal
block or the XLR connector) of the Aqua Driver.
2 Connect your DMX control source to the DMX input of the other Aria unit (when a valid
signal is sensed, the Aria unit will automatically configure itself as a transmitter).
3 Ensure both Aria units are using the same radio channel.
The DMX signal presented at the transmitter will be replicated at the receiver and be fed to
the Aqua Driver. See the
Aria Wireless DMX guide
for more details.
CONVERTING A 0-10V INPUT
The optional Acclaim Lighting UDM (Universal Dimming Module) unit allows you to
collectively control a group of Aqua Drum fixtures using a 0-10V analog input. Setup and
configuration is straightforward:
1 Connect the DMX output of the UDM unit to the DMX input (using either the terminal
block or the XLR connector) of the Aqua Driver.
2 Connect your 0-10V control source to the appropriate input of the UDM unit.
3 Configure the UDM to perform the conversion.
Note: The UDM also has a mains power
supply pass through to which the Aqua Driver can be connected; thus, only one mains input is
required to supply the two devices.
The 0-10V signal presented at the UDM will be converted into a single DMX channel and
fed to the Aqua Driver; the Aqua Driver will need to be placed into
1 Group
mode. The single
channel input best suits Aqua Drum White emitters. See the
UDM guide
for more details.
Power connections
not shown
Power connections not shown
Aqua Driver 150
Summary of Contents for Aqua Drum EO
Page 1: ...User guide Aqua Drum...
Page 2: ......
Page 29: ...27 www acclaimlighting com...
Page 30: ...www acclaimlighting com...
