14
www.acclaimlighting.com
MOUNTING
SURFACE INSTALLATION
To mount an Aqua Drum onto a surface may require you to first remove the yoke in order to
gain full access to the mounting holes.
1 Using a 3/16 (5mm) Allen wrench, loosen the two yoke tensioners; it is not necessary to
remove them completely.
2 Using the 3/16 (5mm) Allen wrench, remove the two yoke bolts plus their flat and spring
washers.
3 Slide the fixture head out from the yoke:
4 Securely fix the yoke to the required surface using fixings appropriate to both the surface
and the weight of the Aqua drum. Each Aqua Drum yoke has a center hole plus two offset
holes. The diameters of these vary depending on the model. See the dimension diagrams
starting on page 20 for details.
5 Once the yoke is fully secured, slide the fixture head back in, align the threads and insert
the yoke bolts plus washers. Ensure the inner lip of each yoke tensioner overlaps the slip
disks on the fixture head.
6 Place the fixture into the required orientation and tighten both yoke bolts and both
tensioners.
Yoke tensioner
Yoke bolt
plus washers
Slip disk
Yoke
Fixture head
Summary of Contents for Aqua Drum EO
Page 1: ...User guide Aqua Drum...
Page 2: ......
Page 29: ...27 www acclaimlighting com...
Page 30: ...www acclaimlighting com...