Accessmatic Falcon 350 User Manual Download

Page: 41 / 58

12 Volt 2.2Ah Battery

SERIES

12 Volt 2.2Ah Battery

OUTPUT: 24 Volt 2.2Ah

Back-up Batteries

Wi-Fi Device

• LED description:

Blue: LED will be flashing during WiFi pairing, and be ON while it completed.

Green: LED will be flashing if WB black box receives signal from the APP.

If your home WiFi disconnects, the green light will flash continuously,

and it will be off until WiFi is connected again.

Red: System failure or wrong PIN.

Functions of Buttons and Terminals

Terminales

P button:

Wi-Fi Paring: Press 1 sec

Default Setting: Press 3 sec

Botón R:

Presione para reiniciar

LED Display

Battery Power: The battery white connector must be fitted the correct way round (positive red to +positive) or you will short

circuit the control board. There are 2 x 12v batteries fitted under the control board. They are connected together in series to

make 24vDC via a black cable with a yellow fuse with positive of one battery to negative of second battery. The remaining

positive and negative terminals go to the control board as per the photo above.

12 Volt 2.2Ah Battery

SERIES

12 Volt 2.2Ah Battery

OUTPUT: 24 Volt 2.2Ah

Back-up Batteries

Wi-Fi Device

• LED description:

Blue: LED will be flashing during WiFi pairing, and be ON while it completed.

Green: LED will be flashing if WB black box receives signal from the APP.

If your home WiFi disconnects, the green light will flash continuously,

and it will be off until WiFi is connected again.

Red: System failure or wrong PIN.

Functions of Buttons and Terminals

Terminales

P button:

Wi-Fi Paring: Press 1 sec

Default Setting: Press 3 sec

Botón R:

Presione para reiniciar

LED Display

Battery Power: The battery white connector must be fitted the correct way round (positive red to +positive) or you will short

circuit the control board. There are 2 x 12v batteries fitted under the control board. They are connected together in series to

make 24vDC via a black cable with a yellow fuse with positive of one battery to negative of second battery. The remaining

positive and negative terminals go to the control board as per the photo above.

Opening your life

AC24NE

Summary of Contents for Falcon 350



























































Search results

Summary of Contents for Falcon 350

Reviews:

Related manuals for Falcon 350

Brands by name

Popular brands

Accessmatic Falcon 350, User Manual

Search results

Summary of Contents for Falcon 350

Reviews:

Related manuals for Falcon 350

Brands by name

Popular brands