2
INTRODUCTION
The KP-KR3 is a two relay multifunction standalone access control keypad
suitable for either indoor or outdoor
use It is housed in a strong, sturdy and vandal resistant Zinc Alloy electroplated case. The electronics are fully
potted making it extremely weather resistant and conforming to IP68
It supports up to 1200 users in a Card, PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ
EM frequency card or key fob, and the Pin length is 4-8 digits
Both of the two relays can operate in Pulse Mode (suitable for access control) or Toggle Mode (suitable for
arming/disarming alarms, switching lights, machines….etc)
The R3K has many extra features including block enrollment, backlit keypad. These features make the R3K an
ideal choice for door access not only for small shops and domestic households but also for commercial and
industrial applications such as factories, warehouses, laboratories, banks and prisons
Features
Weather resistant to IP68
Strong Zinc Alloy Electroplated anti-vandal case
Two relay operation
Both relays can be programmed for 3 modes: Card, PIN, Card + PIN
1200 user capacity
Zone 1: up to 1100 Pin & Card holders, Zone 2: up to 100 Pin & Card holders
Pin length: 4-8 digits; card type: 125KHZ EM card/key fob
Can be used as a standalone keypad
Pulse mode, Toggle mode
Block enrollment, can enroll 1100 consecutive cards within 2 minutes
Backlit keypad
Adjustable Door Relay Output time, Alarm time, Door Open time
Built in light dependent resistor (LDR) for anti-tamper
Built in buzzer
Dual relay outputs for door opening, door status detecting, open door by button
Red, Yellow and Green LEDS display the working status
Supports door bell connection (For relay 2)
12-24V AC/DC power input
