Delete Card by User ID
Deleting by ID number will clear cards and PINS
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Delete User Card by User ID
2 (User ID) #
3. Exit program mode
*
Others
Reset to Factory Default:
This will reset the K401-I to factory default but all card/PIN information will still be retained
1. Power the K401-I down
2. Press and hold the * button and power up the K401-I
3. There will be two bleeps. Then release the * button, after a second there will be one more bleep to confirm
reset
Erase all Cards
This will delete ALL User data
1. Enter Program Mode: *(Master Code) #
2. Press 20000 #
3. Exit: *
All configuration data is retained
Reset Strike-Out Alarm
Enter Master Code or Valid Card/PIN to silence
S
ound and Light indication
Operation Status
Red LED
Green LED
Sounds
Power on
Flashing
Short Single Bleep
Stand by
Flashing
Press Keypad
Flashing
Short Single Bleep
Enter Master Code Entry Mode
ON
Short Single Bleep
In program mode
ON
Single Flash
Short Single Bleep
Entered Program Step Successfully
ON
Single Flash
Short Single Bleep
Entered Program Step Incorrectly
3 Short Bleeps
Exit from the programming mode
Flashing
Short Single Bleep
Entry Granted
ON
Short Single Bleep
Open lock
Green light bright
One Bleep
Alarm Mode Engaged
Flashing
Alarm
Alarm
Red light Shines quickly
Bleeps
Pressing * Toggles Standby / Master
Code Entry
ON/Flashing
Short Single Bleep
ACCESS
SECURITY
PRODUCTS
LTD
