PROGRAMMING
Programming will vary depending on access confirguration. Follow the instructions according to your access
configuration
Programming 1 -------------------- Configure the K401-I
Change the configure settings according to your application (optional). Multiple configuration settings can be
changed at one time: enter program mode, change the desired settings, then exit program mode
Set Master Code
The 4-6 digit Master Code is used to prevent unauthorized access to the system. To interface with the K401-I,
the manager will need a Master Code (factory default code: 6666). We recommend immediate update and
recording of your Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Update Master Code
0
（
New Master Code
）
#
（
Repeat New Master Code
）
#
3. Exit Program Mode
*
SET ACCESS CONFIGURATION
There are 3 types of access configurations for the K401-I
• Card or PIN (Default): The User must present a valid Card to the K401-I or enter their PIN code followed
by the # key, in order to be granted access
• Card Only: The User must present a valid Card to the K401-I in order to be granted access
• Card + PIN: The User must first present a valid Card to the K401-I and then enter their PIN code followed
by the # key, in order to be granted access
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Card or PIN
3. Card + PIN
4. Card only
3 0 #
(Default)
3 1 #
3 2 #
5. Exit program mode
*
Set Relay Configuration
The relay configuration sets the behaviour of the output relay on activation
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Pulse Mode
3. Latch Mode
4 (1-99) #
The relay time is 1-99 seconds. (1 is 50ms)
Default is 5 seconds
4 0 #
Sets the relay to ON/OFF Latch mod
e
4. Exit program mode
*
ACCESS
SECURITY
PRODUCTS
LTD
