Set Strike-out Alarm
The strike-our alarm will engage after 5 failed card/PIN attempts. Factory default is OFF. The strike-our alarm
can be set to deny access for 10 minutes after engaging or it can be set disengage only after entering a valid
card/PIN or Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Strike-Out OFF
3. Strike-Out ON
4. Strike-Out ON
5. Set alarm time
6 0 #
(Default)
6 1 #
Access will be denied for 10 minutes
6 2 #
The buzzer alarms
5 (0 - 30) #
(Default is 1 minute)
6. Exit program mode
*
Programming 2 -------------------- Program Cards and PINS
Programming will vary depending on the access configuration. Follow the instructions according to your access
configuration
GENERAL PROGRAMMING INFORMATION
•
User ID Number: Assign a user ID number to the access code in order to keep track of the users of access
cards or PINS. The user ID number can be any number from 1-1000
IMPORTANT: User IDs do not have to be proceeded with any leading zeros. Recording of User ID
is critical
Modifications to user data require either the card or the User ID be available
•
Proximity Card: 125 KHz industry standard 26 bit EM Proximity Card
•
Keypad PIN: The PIN can be any 4-6 digits between 0000-999999 (except 1234 which is reserved for
factory testing)
ACCESS CONFIGURATION: CARD OR PIN & CARD ONLY
Add User Cards
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Add Card: Using Auto ID
(Allows K401-I to assign Card to next
available User ID number)
3. Add Card: Select Specific ID
(Allows manager to define a specific User ID
to associate the card to)
1 (Read Card) #
Cards can be added continuously
1 (User ID) # (Read Card) #
The user ID is any number from 0-999
4. Exit program mode
*
ACCESS
SECURITY
PRODUCTS
LTD
