Page
26
of
77
Copyright © Access-IS 2020
5.4 Indicator control
These commands control the behaviour of the ‘Good Read’ and ‘Bad Read’ LEDs.
Note: There are no lid lights on the LSR118; these are replaced by the NFC antenna.
Table 5. Indicator LED commands
Command
Description
Default
Parameters/Range
AISGDT
‘Good Read’ LED indicator duration.
Each unit is equivalent to 100
milliseconds.
5
0
–200
AISGDS
‘Good Read’ duration start.
Specifies when the
‘Good Read’ indicator
illuminates.
0
0 - At
‘Good Read’
1 - At media removal
AISGIN
‘Good Read’ indication stop.
Specifies when the
‘Good Read’ indicator
extinguishes.
1
0 - At media removal
1 - Continues after media
removal
AISBDT
‘Bad Read’ LED indicator duration.
Each unit is equivalent to 100
milliseconds.
8
0
–200
AISBDS
‘Bad Read’ duration start.
Specifies when the
‘Bad Read’ indicator
illuminates.
0
0 - At
‘Bad Read’
1 - At media removal
AISBIN
‘Bad Read’ indication stop.
Specifies when the
‘Bad Read’ indicator
extinguishes.
1
0 - At media removal
1 - Continues after media
removal
AISGSL
Switches between LED locations for the
‘Good Read’ indicator.
5
0 - No lights
1 - Board green lights
2 - Board red lights
AISBSL
Switches between LED locations for the
‘Bad Read’ indicator.
10
0 - No lights
1 - Board green lights
2 - Board red lights