Page
20
of
77
Copyright © Access-IS 2020
4.4.1 Interactive mode example
4.4.1.1
‘Good Read’ initiated by LSR detecting media
Comments
LSR Command to Host
Host Command to LSR
Media placed in front of
LSR118. LSR118 sends
commands to host notifying
of media.
[0x16][0x0D]TRIG:1[0x16][0x0A]
-
Host sends a command to
trigger the imager.
-
[0x16][0x74][0x0D]
Imager activated and
barcode scanned.
Illumination activated as
defined in the settings.
Data sent as configured (USB/Serial)
-
Host decides to accept or
reject the data.
-
‘Good Read’:
AISXXR0
Lights activated as defined
in the
‘Good Read’ settings.
-
-
No media detected for 0.5
seconds; LSR118 resets.
-
-
4.4.1.2
‘Good Read’ initiated by host sending trigger command
Comments
LSR Command to Host
Host Command to LSR
Host sends a command to
trigger the imager. This
could be due to a second
sensor.
-
[0x16][0x74][0x0D]
Imager activated, it remains
activated until untriggered or
a
‘Good Read/Bad Read’
command is received. Lights
activated as defined in the
settings.
-
-
Data read by imager.
Data sent as configured (USB/Serial)
-
Host decides to accept or
reject the data.
-
‘Good Read’:
AISXXR0
Lights activated as defined
in the
‘Good Read’ settings.
-
-
No media detected for 0.5
seconds; LSR118 resets.
-
-