Page 2 of 13
Rev: Sept 22, 2008
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9) Only use attachments/accessories specified by the manufacturer.
10) Unplug this apparatus during lightning storms or when unused for long
periods of time.
11) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally or has been dropped.
12) The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Thank you for purchasing this converter box, which has been designed and
manufactured to give you many years of viewing pleasure. This unit will enable
you to view digital broadcasts after February 2009 when analog transmissions will
be turned off in the USA. This unit has been approved by the NTIA for the coupon
program. For more information, visit www.DTV.gov or www.dtv2009.gov or call
1-888-DTV-2009.
REMOTE CONTROL UNIT (RCU)
Two types of RCU’s are available with each model converter
. “Option 1” is a
Dedicated RCU that works only with this device. “Option 2” is a Universal RCU
model capable of operating your TV, VCR, satellite set-top-box or cable set-top-
box in addition to the converter box.
To program the Universal RCU with the codes to operate you model of TV, VCR,
etc, you need to enter a numerical code. A full list of equipment models with their
corresponding codes can be found on the
www.AccessHD.TV
website.
To program the Universal RCU:
Press “TV” (or “AUX”), Press “SETUP” and hold for 3 sec until the selected de-
vice LED blinks twice, then enter the numeric code of your model. If a valid code
has been entered, the LED will blink twice. If it is an invalid code, you will see one
long blink.
