Page 8
2.2 At the bow pull the port side jib reef-
ing line till its knot is at its stop hard up
on the port side of the console in the
cockpit. (see fig 12– page 7, reefing lines)
2.3 Unhook the jib reefing line tension
shock cord hook (located on back bulk-
head behind the seat) and set up the reef-
ing line in a loop to complete a full turn
around the foremast reefing drum. (fig 14,
view of loop)
2.4 Step the mast, fit the reefing line and
re-tension the shockcord. (fig 15)
2.5 Presuming the jib sheet block is shackled to the bottom hole of the clewboard, feed
the sheet through the block and down through the deckeye to the turning block, then
thru the deadeye and the cam cleat, then tie a stopper knot in its end. (see fig. 8—page 4
& fig. 9—page 5).
2.6 At the bow is the Jib Strut Downhaul, free it and attach its plastic hook to the lug on
the front of the claw. (fig 13—page 7).
2.6 Pull in on the downhaul (located on the left side of the console) and cleat it on most
forward of the 2 black (3 on 2004 Worlds model) clamcleats. (fig 6 on page 4)
2.7 Check the manual operation of the jib sheet located at the cam cleat on the right side
of the console.
Fig. 14
Fig. 15