Page 7
1.9 Rotate the mast to fully unroll the sail, haul in on the outhaul and cleat it, pull the
starboard reefing line till its knot is as far as it will go on the port side, then tighten the
reefing drum clamp. (the reefing drum clamp is under the console and as per fig 11). If full
sail is not needed at this time release the outhaul and pull the port side reefing line till its
knot stops stops at the starboard side, cleat the reefing line on the port side aft of the
console, then haul on and cleat the outhaul. (fig 12, reefing lines)
2.
STEPPING THE FOREMAST.
2.1 Before stepping the mast, unroll the
sail, fit the claw and strut, then attach the
strut to the claw with the stainless steel
spring hook.
(as per fig. 7– page 4; fig. 9—page 5 &
fig. 13)
Fig. 11
Fig. 12
Fig. 13