Manual ETH-IDIO-16 B1
5
The ETH-IDIO-16 is designed to be used in rugged industrial environments but is small enough to fit nicely
onto any desk or testing station. Its board is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel
powder-coated enclosure with an anti-skid bottom.
The ETH-IDIO-16 has a DC Jack and screw terminals to connect the required external power. This power
can be provided by our PWR-ACDC-5V, your +5Vdc regulated power supply, or by ordering the
–WI option
where you provide 7 VDC - 30 VDC.
OEM ETH/104 Form Factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique
is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). The board can
be added to any PC/104 type stack by connecting it to an available 10/100 base T port typically available on
embedded CPU form factors such as EPIC, and PC/104. It can also be installed using standoffs inside other
enclosures or systems.
Figure 1-1: Block Diagram
